Home
Whole House Water System Single Replacement Filter
Fluoride Reduction Specialty Filter 4.5" x 10 Inch
Fluoride Reduction Specialty Filter 4.5" x 10 Inch
Fluoride Reduction Specialty Filter 4.5" x 10 Inch
Fluoride Reduction Specialty Filter 4.5" x 10 Inch
SKU: FI-FLUORIDE10-BB

Fluoride Reduction Specialty Filter 4.5" x 10 Inch

Sale price$61.95 USD
Discover premium water purification for your entire home. Our activated alumina filter effectively removes fluoride, hydrogen chloride, and other contaminants from your water supply. With high flow rates and minimal pressure drop, this 10-inch system treats up to 11,000 PPM of fluoride while fitting standard Big Blue housings. Experience cleaner, safer water throughout your home.
  • Effective fluoride reduction
  • High flow rate, low pressure drop
  • 10 Inch filter treats 11,000 PPM Fluoride
  • Fits all standard 10 Inch Big Blue filter housings
  • 10 micron nominal rating

Clean Fluoride Free Water

Our FI-FLUORIDE10-BB filter cartridges use premium grade activated alumina media to effectively remove fluoride from the water. Drinking water with fluoride levels above 2 ppm (mg/L) can lead to mottling of the teeth and at higher levels above 4 mg/L, it can result in serious health problems. In addition to fluoride, activated alumina can also reduce the levels of hydrogen chloride, hydrogen sulfide, carbon dioxide in the water.

The FI-FLUORIDE10-BB filter has a capacity of 11,000 ppm* (mg/L) and will fit in our 10 Inch standard Big Blue housings.

* To calculate how many gallons the Fluoride Removal Filter can last for the fluoride levels in your source water, take capacity level (23,000 ppm for 20 Inch Fluoride Filter or 11,000 ppm for 10 Inch Fluoride Filter) and divide it by the fluoride levels from your water before it enters the filter.

Example (1): If the fluoride levels in your water is 0.5ppm per gallon, it can treat up to 46,000 gallons (23,000 ppm / 0.5ppm per gal) for the 20 Inch Fluoride Removal Filter or treat up to 22,000 gallons (11,000 ppm / 0.5ppm per gal) for the 10 Inch Fluoride Removal Filter.

Overall rating: 1.0 / 5 from 1 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Very elevated nitrates after installation.

"I put one of these filters in on a fluoride job for a single point of use faucet. I retested the water after installation. The fluoride was gone but the water testing laboratory called and told me the nitrates were though the roof, nearly 100 mg/L. I went back to the job, ran the water for nearly 1/2 hour. Had to retest the raw and treated water for nitrates to be sure it wasn't from the well. The nitrates did come down to 8 mg/L through the filter and 0 from the well. Still elevated, I probably will not use this filter in the future."

— Brian C. (1/5)

Q&A